Sikaflex®-2c NS TG is a premium-grade, polyurethane-based elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Available in 35 standard colors (> 320 special colors) with a convenient Colorpak. Also available as a pre-pigmented product in Limestone Gray. Meets ASTM C 920, Type M, Grade NS, use T, NT, O, M, G, A and Federal Specification TT-S-00227E. Product developed by addition of Sikaflex®-2c NS TG Component to the standard Sikaflex 2c NS EZ Mix joint sealant.
- Capable of ± 25 % joint movement
- Chemical cure allows the sealant to be placed in joints exceeding 1/2 inch (25.4 mm) in depth
- Tough, durable, flexible consistency
Usage
- Applications to include: parking garages, walkways, plazas, platforms, etc., with exposure to foot or pneumatic-tire traffic
- Intended for horizontal joints with a minimum depth of 1/2 in. (12.7 mm)
- Placeable at temperatures as low as 40 °F (4 °C)
- Adheres to most substrates commonly found in construction
- Acceptable for sealing joints in institutions, correctional facilities, etc., as a tamper resistant sealant
Advantages
- Capable of ± 25 % joint movement
- Chemical cure allows the sealant to be placed in joints exceeding 1/2 inch (25.4 mm) in depth
- Tough, durable, flexible consistency
- Exceptional cut and tear resistance
- Exceptional adhesion to most substrates without priming
- Color uniformity assured via Color-pak system or pre-pigmented Limestone Gray
- No Color-pak needed in pre-pigmented Limestone Gray
- Jet fuel resistant
Packaging
1.5 gal. unit (5.7 L) of Sikaflex 2c NS EZ Mix plus 2.63 fl. oz. (0.08 L) of Sikaflex NS TG component. Color-pak is also purchased separately. Limestone Gray color available pre-pigmented
Ambient Air Temperature
40–100 °F, ambient and substrate temperatures. Sealant should be installed when joint is at mid-range of its anticipated movement.
Substrate Temperature
40–100 °F, ambient and substrate temperatures. Sealant should be installed when joint is at mid-range of its anticipated movement.