Description
Clear, concentrated mold and moisture resistant sealer for the protection of structural materials after water/flood restoration services as well as for the boosting/resurfacing of existing Enviroguard coatings in unconditioned and accessible spaces.
*Treated Articles Exemption - This product contains an EPA registered antimicrobial to protect the coating from non-public health fungi and odor causing bacteria. No public health claims are being made.
Features/Benefits
- Penetrates and bonds to both existing Enviroguard protective coatings and structural surfaces.
- Creates a clear and durable protective finish
- Breathable to allow drying and to help prevent dry or wet rot conditions
- Moisture resistant to help control moisture content
- Bacteria, Algae and Fungi resistant for long-term protection of the sealant
- Water-based and non-flammable
Surfaces
Fortify is used to resurface Enviroguard Protective Coatings and protect most structural construction materials for up to 12 months including treated and untreated lumber, plywood, OSB, particle board, cement board, wallboard, composite construction materials and metals. Probable areas of use are structural surfaces within the building envelope including warm-side sheathing, trusses, framing, joists, plates, pillars, posts, beams, gypsum board and backer board.
Coverage Rate
For resurfacing Enviroguard Protective Coatings, use a 9-to-1 dilution (9 parts water to 1 part Fortify). Apply at a rate of 160 ft2 per gallon of ready-to-use solution. Coverage may vary due to surface texture, porosity, age and application method. This does not include loss from over-spray or over-use.
For structural materials, use a 2:1 dilution (2 parts water to 1 part Fortiy). Apply to the point of run-off at a rate of up to 300 ft2 per gallon of ready-to-use solution.